How do I start a Flat Top Bald Cypress?

CapeFear盆景

Sapling
Messages
45
Reaction score
51
Location
Cape Fear
USDA Zone
7b
I bought this bald cypress (taxodium distichum from a friend last fall. Was grown for 5 years from seed in the same 10 gallon container. I waited till February to repot the chopped the trunk in March. Mid April the tree exploded. I rubbed off all the lower buds and kept the top ones.

I want to style the tree like the local trees in my area. Most are tall skinny with flat tops and maybe one or two lower smaller branches.

My consern is I will get inverse taper at the trop of the tree If I leave too many branches. Also I’m not sure how long to let the top branches grow until I cut them back.

Any information would be helpful.
 

Attachments

  • 1927B281-9561-4834-92FE-F6D8B0D18B11.jpeg
    1927B281-9561-4834-92FE-F6D8B0D18B11.jpeg
    173.4 KB · Views: 173
  • 4BAE0C51-0CC9-4DC6-AB49-528334D6ADDC.jpeg
    4BAE0C51-0CC9-4DC6-AB49-528334D6ADDC.jpeg
    258.2 KB · Views: 177

Hack Yeah!

Omono
Messages
1,635
Reaction score
3,179
Location
Marietta, GA
USDA Zone
7b
In this famous example it looks like the tree initially splits into 2 trunks, maybe start there... I've got a couple I've been playing with for 2 or 3 years and one growing in the ground for my "real" tree eventually so I'm curious to the proper steps as well.

Maybe some more experienced guys can chime in @johng @BillsBayou

Screenshot_20210422-205031_Chrome.jpg
 

Shogun610

Masterpiece
Messages
3,618
Reaction score
6,237
Location
Lehigh Valley Pennsylvania
USDA Zone
6B
From pruning a bald cypress that’s flat top, it was collected. But that bald cypress I’ve worked on was trimmed back and left to grow out for the season, then pruned and wired in fall . Most of the fantastic examples of Bald Cypress I’ve seen were all collected. I don’t know how hard it is to collect down there, but it would be a fun trip. This is any example I have on my bonsai inspiration Pinterest. You may want to put it into a Anderson flat to grow or a grow box if you’re going for the flat top, you’ll get exponential growth for Bald Cypress that way, and just keep cuttting it back until you get a tapered apex that allows for branching up the top, while still letting the side branches grow out to grow the trunk.
 

Attachments

  • 4894A022-4179-4BE1-B852-F10F84BD02D9.jpeg
    4894A022-4179-4BE1-B852-F10F84BD02D9.jpeg
    20.9 KB · Views: 206
Last edited:

Sekibonsai

Shohin
Messages
407
Reaction score
606
Location
Santa Fe, TX
USDA Zone
8
From pruning a bald cypress that’s flat top, it was collected. But that bald cypress I’ve worked on was trimmed back and left to grow out for the season, then pruned and wired in fall . Most of the fantastic examples of Bald Cypress I’ve seen were all collected. I don’t know how hard it is to collect down there, but it would be a fun trip. This is any example I have on my bonsai inspiration Pinterest. You may want to put it into a Anderson flat to grow or a grow box if you’re going for the flat top, you’ll get exponential growth for Bald Cypress that way, and just keep cuttting it back until you get a tapered apex that allows for branching up the top, while still letting the side branches grow out to grow the trunk.
"Fun" is one word.... granted I'm 54 and have been doing this most of my life... This years target and next years... That water is a balmy 45 degrees or so and about thigh deep. Gonna have to catch that one on a low day.
 

Attachments

  • 0124211400_HDR.jpg
    0124211400_HDR.jpg
    88.8 KB · Views: 162
  • 0124211400a_HDR.jpg
    0124211400a_HDR.jpg
    56.8 KB · Views: 138

Sekibonsai

Shohin
Messages
407
Reaction score
606
Location
Santa Fe, TX
USDA Zone
8
The "soil line flare" is about 26" across. The whole mud ball was about 200 pounds. Come-along up a 15' levy and back down to my nursery... Not sure where I'm going with this one- will let it go crazy for a year and see what it tells me.
 

Attachments

  • 0206211703.jpg
    0206211703.jpg
    100.3 KB · Views: 128
  • 0206211504.jpg
    0206211504.jpg
    99.7 KB · Views: 93
  • 0206211458_Burst01.jpg
    0206211458_Burst01.jpg
    105.4 KB · Views: 94
  • 0206211439.jpg
    0206211439.jpg
    111.2 KB · Views: 87
  • 0204211145.jpg
    0204211145.jpg
    64.6 KB · Views: 87
  • 0204211146_HDR.jpg
    0204211146_HDR.jpg
    97 KB · Views: 84
  • 0131211311.jpg
    0131211311.jpg
    63.2 KB · Views: 129

Sekibonsai

Shohin
Messages
407
Reaction score
606
Location
Santa Fe, TX
USDA Zone
8
As far as styling a flat top, catch John Geangal (sp) on Youtube. Also look at the photos of Black Bayou Photography and Ben Pierce Photography.

You can pick two branches and wire them out when they lignify and let everything else grow wild.
 

Shogun610

Masterpiece
Messages
3,618
Reaction score
6,237
Location
Lehigh Valley Pennsylvania
USDA Zone
6B
"Fun" is one word.... granted I'm 54 and have been doing this most of my life... This years target and next years... That water is a balmy 45 degrees or so and about thigh deep. Gonna have to catch that one on a low day.
That looks very fun 🤩
I wonder if tackling the tree to knock it over works after you saw roots lol. But on a serious note , very nice collected material, that’s one type of tree on my list.
 

HENDO

Shohin
Messages
414
Reaction score
810
Location
Alberta, Canada
USDA Zone
4a
+1 on John Geanangel styling. Here's one I have in development based on what I picked up from his videos - lot's of carving involved in year ~2-3. For skinnier material with more movement the "wandering" Vaughn Banting single leader style may be more appropriate.

Ultimately you're shooting for a tree that had the top twisted off in high winds / hurricane, then one or more new leaders emerging from that interface. Lower branches should be bend down as if they are older than the leader(s) - @Sekibonsai described a nice technique for starting this as the branches start to lignify.

20210420_185820.jpg

20210320_123028.jpg

20210130_214122.jpg

20210102_112108.jpg
 

CapeFear盆景

Sapling
Messages
45
Reaction score
51
Location
Cape Fear
USDA Zone
7b
Thank you all for the feedback and information. For now I guess I’ll let the truck branches grow out a bit to thicken the trunk a bit more and let the selected top branches grow out until fall.
 

CapeFear盆景

Sapling
Messages
45
Reaction score
51
Location
Cape Fear
USDA Zone
7b
So I’ve been neglecting my trees though summer due to unforeseen events and my Bald Cypress has suffered.
Does anyone have any suggestions to what might be happening? The foliage is browning and falling off, it’s too early for this to happen in my area. I think the soil might be compacted, I haven’t pulled it out of the pot to check the roots yet.
Any information would be appreciated!
 

Attachments

  • 57E46D89-D582-48EB-AC42-9191461772EE.jpeg
    57E46D89-D582-48EB-AC42-9191461772EE.jpeg
    241.4 KB · Views: 78
  • 1BD4A1ED-05A1-4C3A-AF23-51E4B3BFBE57.jpeg
    1BD4A1ED-05A1-4C3A-AF23-51E4B3BFBE57.jpeg
    301.3 KB · Views: 79
  • A368D26F-3EE3-4FA2-89B1-1B0278F037D4.jpeg
    A368D26F-3EE3-4FA2-89B1-1B0278F037D4.jpeg
    233.9 KB · Views: 90

Cajunrider

Imperial Masterpiece
Messages
6,542
Reaction score
12,898
Location
Louisiana
USDA Zone
9A
So I’ve been neglecting my trees though summer due to unforeseen events and my Bald Cypress has suffered.
Does anyone have any suggestions to what might be happening? The foliage is browning and falling off, it’s too early for this to happen in my area. I think the soil might be compacted, I haven’t pulled it out of the pot to check the roots yet.
Any information would be appreciated!
You are in 7b, it may appear early to you but I don't think you are far away from the time when BCs naturally turn bronze and drop leaves.
 

CapeFear盆景

Sapling
Messages
45
Reaction score
51
Location
Cape Fear
USDA Zone
7b
You are in 7b, it may appear early to you but I don't think you are far away from the time when BCs naturally turn bronze and drop leaves.
Thanks for the advice. That’s what I’m hoping is what is happening, the only thing that makes me feel it’s something else is all the BC’s around my house haven’t turned yet. Also last year this tree didn’t turn until mid November. This is my first BC, do they turn earlier when they are bonsai?
 

Cajunrider

Imperial Masterpiece
Messages
6,542
Reaction score
12,898
Location
Louisiana
USDA Zone
9A
Thanks for the advice. That’s what I’m hoping is what is happening, the only thing that makes me feel it’s something else is all the BC’s around my house haven’t turned yet. Also last year this tree didn’t turn until mid November. This is my first BC, do they turn earlier when they are bonsai?
Yours is in pot. The soil in the pot gets colder than the soil in the ground. I would mulch your bc well to prepare for the winter.
 

Potawatomi13

Imperial Masterpiece
Messages
6,168
Reaction score
4,403
Location
Eugene, OR
USDA Zone
8
From pruning a bald cypress that’s flat top, it was collected. But that bald cypress I’ve worked on was trimmed back and left to grow out for the season, then pruned and wired in fall . Most of the fantastic examples of Bald Cypress I’ve seen were all collected. I don’t know how hard it is to collect down there, but it would be a fun trip. This is any example I have on my bonsai inspiration Pinterest. You may want to put it into a Anderson flat to grow or a grow box if you’re going for the flat top, you’ll get exponential growth for Bald Cypress that way, and just keep cuttting it back until you get a tapered apex that allows for branching up the top, while still letting the side branches grow out to grow the trunk.
Very nice tree🤗.
 
Top Bottom