Hope I didn't kill it! My mini mugo

just.wing.it · Feb 3, 2017

Had this little guy for a year in its glazed teal pot, didn't skip a beat last season.
Originally it was a tiny bush that you couldn't see into at all.
Like this....I think this was, day of purchase, before cleaning dead stuff out.

So, I kinda got board and decided to put some wire on it....
Its ugly, I warn you....
Also my first time using properly annealed copper.....I like....
Before: sorry for some blurriness...

All five angles, if you will....

just.wing.it · Feb 3, 2017

And after....
All 5 angles....

I hope I didn't kill it, due to the fact that I was a little abusive to the tree during this wiring....
I noticed, near the end, that it seemed kind of loose in its pot, so you see the hold down wires.

just.wing.it · Feb 4, 2017

Man....that's some loose wiring...I tried to keep it kinda loose, the pics don't do me any justice....

sorce · Feb 4, 2017

just.wing.it said:
loose

Trending....

I think it's doing its job except here.

I'd leave it now so to not jostle it anymore.

But eventually get a smaller diamter wire better on that red...
And a smaller one still on that yellow...
And you can compact that more..

Maybe even look to rid yourself of all but one of that first whorl, and grow it some.
Wonder what @Vance Wood says.

Nice.

Sorce

just.wing.it · Feb 4, 2017

sorce said:
Trending....

I think it's doing its job except here.
View attachment 130896

I'd leave it now so to not jostle it anymore.

But eventually get a smaller diamter wire better on that red...
And a smaller one still on that yellow...
And you can compact that more..

Maybe even look to rid yourself of all but one of that first whorl, and grow it some.
Wonder what @Vance Wood says.

Nice.

Sorce

Yeah, when I realized that I was being a little rough with it, I just stopped.
Wanted to write more, but that'll do for now.
It kinda only has one whorl of branches, I'll take a closer pic.
The way I bent it, makes it look like a lower whorl.

just.wing.it · Feb 4, 2017

Take a gander... kind of a 3/4 branch knuckle.
It's almost acceptable, but I think eventually, I might get rid of 2 more branches.
I'll be watching for swelling in that knuckle...

sorce · Feb 4, 2017

just.wing.it said:
lower whorl.

Bottom batch...

Potatos...tahtos.

I would see to leaving only that left front one....eventually.

Possibly just cutting off that big back one later this year of all goes well.

Sorce

Vance Wood · Feb 4, 2017

Pull back with the focal length and let's see the rest of the tree in relation to everything else. By the way; did you cut the length of the needles? That really is not necessary. Over a short time Mugos reduce needle length all by themselves. Cutting needles is a useless technique with Mugo Pines.

just.wing.it · Feb 4, 2017

Vance Wood said:
Pull back with the focal length and let's see the rest of the tree in relation to everything else. By the way; did you cut the length of the needles? That really is not necessary. Over a short time Mugos reduce needle length all by themselves. Cutting needles is a useless technique with Mugo Pines.

I did not cut the needles....lemme get a scale reference pic for you...uno momento.

just.wing.it · Feb 4, 2017

Some of the needles are super small.

It's a little guy. No taper. The slightest basal flare.

just.wing.it · Feb 4, 2017

Basically, if it does survive the torture I gave it, I hope for back budding and want to reduce it more... create the smallest tree I can.

Vance Wood · Feb 4, 2017

Concentrate on branches from the first swirl if you don't get some back budding below that spot in which case you need to encourage those and use one or more of them. You are not talking about a short term project this will take about four years if the tree starts to prosper. I asked about the needles being clipped because of the appearance of the growth in this photo, they looked clipped.

Vance Wood · Feb 4, 2017

Vance Wood said:
Concentrate on branches from the first swirl if you don't get some back budding below that spot in which case you need to encourage those and use one or more of them. You are not talking about a short term project this will take about four years if the tree starts to prosper. I asked about the needles being clipped because of the appearance of the growth in this photo, they looked clipped.

Bolero · Feb 4, 2017

Here are two little Mugo's that I have 3 yrs invested in training, I have small amount of wiring on both to get more flattening out, they are somewhat dense, I don't want the radical pruning on them, I am waiting to see what turns out, one is 5" from soil with a 5" width of foliage, the other is 4" from soil with 4" of foilage...

*Not trying to highjack your thread just showing an example of small Mugos with ongoing training and BTW I am guilty of clipping the needles to obtain what I think is a more neat and uniform look...

I get a lot of enjoyment in viewing them as small Mugo's & watching them grow, I water once a day, twice a day in hot summer & I fertilize with Miracle-Gro 24-8-16 diluted in water every 3 weeks April thru November...

Hopefully I will be Styling Training a much, much larger Mugo this Spring...

just.wing.it · Feb 4, 2017

Bolero said:
Here are two little Mugo's that I have 3 yrs invested in training, I have small amount of wiring on both to get more flattening out, they are somewhat dense, I don't want the radical pruning on them, I am waiting to see what turns out, one is 5" from soil with a 5" width of foliage, the other is 4" from soil with 4" of foilage...

*Not trying to highjack your thread just showing an example of small Mugos with ongoing training and BTW I am guilty of clipping the needles to obtain what I think is a more neat and uniform look...

I get a lot of enjoyment in viewing them as small Mugo's & watching them grow, I water once a day, twice a day in hot summer & I fertilize with Miracle-Gro 24-8-16 diluted in water every 3 weeks April thru November...

Hopefully I will be Styling Training a much, much larger Mugo this Spring...
View attachment 130940

Nice! I like em!

Vance Wood · Feb 4, 2017

Here are a couple of Shohin Mugos both about 9 inches tall. I do not cut the needles except to remove them. Over time they get small by themselves.

just.wing.it · Feb 5, 2017

Vance Wood said:
Here are a couple of Shohin Mugos both about 9 inches tall. I do not cut the needles except to remove them. Over time they get small by themselves.View attachment 130943 View attachment 130944

Wow Vance, they look great!
Thanks!

just.wing.it · Dec 21, 2017

Today:

Doing well...
Plan is to get it into a colander or something similar next year.
That's all.

just.wing.it · Dec 21, 2017

Vance Wood said:
Here are a couple of Shohin Mugos both about 9 inches tall. I do not cut the needles except to remove them. Over time they get small by themselves.View attachment 130943 View attachment 130944

Those really are beautiful Vance, but I assure you that I never, nor would I ever cut the needles on a pine tree.

defra · Dec 22, 2017

Vance Wood said:
Here are a couple of Shohin Mugos both about 9 inches tall. I do not cut the needles except to remove them. Over time they get small by themselves.View attachment 130943 View attachment 130944

I agree i love that last one!
Vance how long is that one in training ?

@just.wing.it
I like it ill do a quick virt of what i imagine but have to fire up the pc post it in a sec!

Hope I didn't kill it! My mini mugo

Deadwood Head

Deadwood Head

Deadwood Head

Nonsense Rascal

Deadwood Head

Deadwood Head

Nonsense Rascal

Lord Mugo

Deadwood Head

Deadwood Head

Deadwood Head

Lord Mugo

Lord Mugo

Omono

Deadwood Head

Lord Mugo

Deadwood Head

Deadwood Head

Deadwood Head

Masterpiece

Similar threads