DIY screens

Jessf

Mame
Messages
121
Reaction score
0
Location
Guelph, On, Canada
I picked up some 1/4"x1/4" metal screening and two pine panks for some quick sifting frames. One screen gets the 1/4"x1/4"mesh, the other screen gets two layers of mesh, offset, so the final size is 1/8"x1/8". I wove an "x" through the two screens to keep them pressed together.

100_4581-1.jpg

100_4583-1.jpg


Not perfect but cheap and took less than 20 mins to put together.
 

monza

Shohin
Messages
384
Reaction score
6
Location
Alberta, Canada
USDA Zone
3
Let me know how the two 1/4 put together works? I've been holding off until I find 1/8".
Have you'd seen the 'shaker' you could build that fits over a wheelbarrow? Simple and looks like it would work. I see if I can find link and post it up.

Ha... Not what I was looking for but has potential:
www.youtube.com/watch?v=ej-TdUBhQWE
 
Last edited:

Jessf

Mame
Messages
121
Reaction score
0
Location
Guelph, On, Canada
I tried them out yesterday and both worked well. The double layered screen didn't get clogged like I thought it might.
 

Similar threads

Top Bottom