Paul G
Mame
Some people hate sifting components, but I enjoy it quite a bit. What I don’t enjoy is my sifter. As I switch out the various screens, they eventually bend and leave gaps. I came up with this trick earlier in the week, and it’s made a big difference.
Below is my old sifter:
Like many of you, I have been collecting colanders, and that’s what gave me the idea. The design speaks for itself. I made one for each screen size and chucked the outer ring. The black strips are small zip ties...make sure the connecter is on the inside so you don't cut your hands while you're going swirly-swirl
I hope this helps someone
Paul
Below is my old sifter:
Like many of you, I have been collecting colanders, and that’s what gave me the idea. The design speaks for itself. I made one for each screen size and chucked the outer ring. The black strips are small zip ties...make sure the connecter is on the inside so you don't cut your hands while you're going swirly-swirl
I hope this helps someone
Paul