wood pot for grow boxes

BISTEK

Yamadori
Messages
68
Reaction score
39
Location
Las Vegas
USDA Zone
9b
I wanted to build wood grow boxes for my bonsai this coming repotting season to make them grow bigger. Any suggestion how to build one?
 

RJG2

Omono
Messages
1,418
Reaction score
4,009
Location
Southern Maine
USDA Zone
6a
Screw 4 boards together into a square or rectangle (or triangle, pentagon, hexagon, etc). Screw slats to the bottom. If the slats are too far apart to hold the potting media, staple in a layer of window screen and/or hardware cloth.

There are lots of example on here, look around, and find a style you like.
 

BISTEK

Yamadori
Messages
68
Reaction score
39
Location
Las Vegas
USDA Zone
9b
Screw 4 boards together into a square or rectangle (or triangle, pentagon, hexagon, etc). Screw slats to the bottom. If the slats are too far apart to hold the potting media, staple in a layer of window screen and/or hardware cloth.

There are lots of example on here, look around, and find a style you like.
Thank you
 

RJG2

Omono
Messages
1,418
Reaction score
4,009
Location
Southern Maine
USDA Zone
6a
Here's a spruce in one I made with extra side holes for aeration, lined with aluminum window screen.

It was too big, so I added that middle board when I potted.

PXL_20211016_183004649.jpg
 

BISTEK

Yamadori
Messages
68
Reaction score
39
Location
Las Vegas
USDA Zone
9b
and where you can find that kind of wood with holes already?
 

Wires_Guy_wires

Imperial Masterpiece
Messages
6,453
Reaction score
10,724
Location
Netherlands
I don't know what it's like in the US, but our local mom & pop butchers, vegetable sellers, fruit farmers and weekly market people usually have ready made wooden boxes they store their produce in.
Not built to last, but add some mesh and they'll hold up for a year and a bit.
Also a bit (read: waaaaay!) cheaper than DIY wooden builds since wood is insanely expensive at the moment. Traditionally, they're used for most citrus fruits and harder fruit stuff like apples, nuts and almonds.

Wine crates (to stock 6 bottles) can be used as well.
 

TN_Jim

Omono
Messages
1,972
Reaction score
2,443
Location
Richmond VA
USDA Zone
7a
pallets are generally easy to find and free
Lowe’s generally is an easy get

not all are the same, look for ones that have been treated

saw the center boards out rather than taking the pallet apart is easier

predrill holes for screws to avoid splitting
the ones I’ve made that have four inner corner supports have lasted much longer

here’s an example of this:
1890C060-0F7D-4361-8B83-136434068A7F.jpeg
 

n8

Shohin
Messages
477
Reaction score
1,169
Location
Central Sacramento Valley
USDA Zone
9a
I also use pallets and scrap wood. Free and readily available. If you do need to purchase wood, cedar fencing planks are on the cheap side.

I've seen some real nice grow box builds on the forum, but I don't get very fancy with mine. I reckon they're just being used for a few years.



IMG-8444.jpg IMG-8446.jpg IMG-8445.jpg IMG-8447.jpg
 

Wulfskaar

Omono
Messages
1,224
Reaction score
1,924
Location
Southern California
USDA Zone
10a
FYI... some basic measurements for volume of soil.

VERY ROUGH ESTIMATE:
12" x 12" x 6" = 3.74 US Gallons

I used that size for a couple grow boxes I made because I got a couple 3.5 gallon bags of soil from bonsaijack.com. They basically fit really well into that size of box. You can edit the size of your box, but it's good to know how much soil it will require.
 

TN_Jim

Omono
Messages
1,972
Reaction score
2,443
Location
Richmond VA
USDA Zone
7a
FYI... some basic measurements for volume of soil.

VERY ROUGH ESTIMATE:
12" x 12" x 6" = 3.74 US Gallons

I used that size for a couple grow boxes I made because I got a couple 3.5 gallon bags of soil from bonsaijack.com. They basically fit really well into that size of box. You can edit the size of your box, but it's good to know how much soil it will require.
that’s a great point
what kind of stereo you going to put in this new ride..does it cost more than the car🤣
 

Gary McCarthy

Chumono
Messages
549
Reaction score
717
Location
Buffalo/Rochester NY area
USDA Zone
6a
 

BISTEK

Yamadori
Messages
68
Reaction score
39
Location
Las Vegas
USDA Zone
9b
pallets are generally easy to find and free
Lowe’s generally is an easy get

not all are the same, look for ones that have been treated

saw the center boards out rather than taking the pallet apart is easier

predrill holes for screws to avoid splitting
the ones I’ve made that have four inner corner supports have lasted much longer

here’s an example of this:
View attachment 404793
thanks for your info
 
Top Bottom