What kind of clear coat for shelves that isn't glossy

Cadillactaste

Neagari Gal
Messages
16,334
Reaction score
21,071
Location
NE Ohio: zone 4 (USA) lake microclimate
USDA Zone
5b
Just curious what clear finish to put on flooring of gazebo (cold greenhouse) that isn't shinny. Do I go with a satin finish or...a clear decking finish? Or is there something better as an option?

THANKS!
 
Last edited:

Nybonsai12

Masterpiece
Messages
3,826
Reaction score
7,646
Location
NY
USDA Zone
7a
I believe a few coats of a gloss finish will end up giving you more durability, but will be shiny. What kind of wood is it going on?

The satin is probably the way to go. Are you doing it or are you hiring somebody? Perhaps they can offer a suggestion. I had floors poly'd last year and went satin because the gloss was too much. I think they can actually mix the gloss and satin and get somewhere in between the two as well.
 

Cadillactaste

Neagari Gal
Messages
16,334
Reaction score
21,071
Location
NE Ohio: zone 4 (USA) lake microclimate
USDA Zone
5b
actually my husbands going to be doing it. Since we're doing a rustic look I don't wish for shiny. He mentioned to take a sample piece to check finish. It is in an enclosed area. But...needs still protected.
 

Nybonsai12

Masterpiece
Messages
3,826
Reaction score
7,646
Location
NY
USDA Zone
7a
if thats the case, definitely just take a couple of pieces of the wood and try a few different options to see which you like best.
 

Cadillactaste

Neagari Gal
Messages
16,334
Reaction score
21,071
Location
NE Ohio: zone 4 (USA) lake microclimate
USDA Zone
5b
if thats the case, definitely just take a couple of pieces of the wood and try a few different options to see which you like best.

Thanks...I guess I will. I contemplated tung oil...but, not sure if I want to have to keep reapplying and such at a later date. Or how often one must. So...I'll check out Sherwin Williams tomorrow.
 

whfarro

Chumono
Messages
723
Reaction score
795
Location
Rockland County, NY
USDA Zone
6A
Cabot makes an Australian Timber Oil that works well to protect the wood.
 

Cadillactaste

Neagari Gal
Messages
16,334
Reaction score
21,071
Location
NE Ohio: zone 4 (USA) lake microclimate
USDA Zone
5b
Cabot makes an Australian Timber Oil that works well to protect the wood.

I live in the boonies. Nothing like that here and we need to get this finished. Took a piece in that was burnt and stained. The clear decking stain penetrates and just left many bubbles. So I got a satin clear floor that didn't bubble. Not overly glossy.
 

Cadillactaste

Neagari Gal
Messages
16,334
Reaction score
21,071
Location
NE Ohio: zone 4 (USA) lake microclimate
USDA Zone
5b
We only have a Sherwin Williams and an Ace Hardware near us. I don't feel like driving two hours (return trip) to get something...and so I went with a Minwax Polyurethane for floors. "Professional Formula" clear satin. You can barely tell anything has been applied. It was the only clear that didn't bubble up on the torched and stained wood we were applying it to. Curious if the burnt wood did something to the finish to not allow others to penetrate.
 

Cadillactaste

Neagari Gal
Messages
16,334
Reaction score
21,071
Location
NE Ohio: zone 4 (USA) lake microclimate
USDA Zone
5b

GrimLore

Bonsai Nut alumnus... we miss you
Messages
8,502
Reaction score
7,453
Location
South East PA
USDA Zone
6b
Our wood is torched and stained already. I needed a clear coat to protect what we had done to the wood already.

I have my plants on barn wood stands(unfinished) and temporary pine shelving that I stained black some years ago. I treat both with all purpose Thompsons because the wood Thompsons has to much paraffin in it and has white specs until it warms up. Those get treated every other year and they never have gotten shiney and have held up VERY well although kept outdoors. I am pretty certain any good quality clear oil will serve you for many years indoors without gloss and does not have to be as expensive(or needed) as furniture treatments.

Grimmy
 

Cadillactaste

Neagari Gal
Messages
16,334
Reaction score
21,071
Location
NE Ohio: zone 4 (USA) lake microclimate
USDA Zone
5b
I have my plants on barn wood stands(unfinished) and temporary pine shelving that I stained black some years ago. I treat both with all purpose Thompsons because the wood Thompsons has to much paraffin in it and has white specs until it warms up. Those get treated every other year and they never have gotten shiney and have held up VERY well although kept outdoors. I am pretty certain any good quality clear oil will serve you for many years indoors without gloss and does not have to be as expensive(or needed) as furniture treatments.

Grimmy

There it is in a nut shell Grimmy...the upkeep. My husband doesn't wish for that. He would rather buy a higher dollar product and basically be done. It is what it is...and so since it isn't myself applying the product I can live with it.
 
Top Bottom