Copper Beech Airlayer1

BobbyLane

Imperial Masterpiece
Messages
6,058
Reaction score
17,659
Location
London, England
Inspired by Peter chan and his airlayering shenanigans i thought i would try my hand at air layering a couple of Beech trees i picked up from a nursery today.
i went out specifically to find trees that had potentially good tops with lots of established branches, the bases do not matter at this point in time.
ill post both trees here, when i begin the layers ill do another thread for tree 2.
i will attempt multiple layers from each tree.

20210428_151727.jpg20210428_154933.jpg20210428_154939.jpg20210428_161153.jpg
 

BobbyLane

Imperial Masterpiece
Messages
6,058
Reaction score
17,659
Location
London, England
Its perfect timing to attempt beech air layers as theyre just getting ready to move...shall i wait until they break bud?

the taller one i will try a clump, has all the bones, see..
20210428_174456.jpg
20210428_174641.jpg20210428_174621.jpg

the layer attempt will be made at the orange line.
 

BobbyLane

Imperial Masterpiece
Messages
6,058
Reaction score
17,659
Location
London, England
Inspired by Ryan neils Hornbeam raft, i want to attempt a raft style tree with Beech air layer two, has the bones, see...
20210428_174814.jpg
20210428_154933.jpg

i will make the layer at orange line
20210428_174802.jpg

i plan to use chopped spagnum moss, im about to order some rooting homone, the powdery stuff.
 

BobbyLane

Imperial Masterpiece
Messages
6,058
Reaction score
17,659
Location
London, England
I started on the clump layer today, then i began a second layer, probably another clump further up the tree.
i think 2 layers on this tree will be enough for now.
on the second i actually used large ryuga knob cutters, i found them to be quicker and more effective at rippling the cambium and lifting it up, then i cleaned up with the knife.
 

Attachments

  • 20210429_143600.jpg
    20210429_143600.jpg
    255.4 KB · Views: 70
  • 20210429_144755.jpg
    20210429_144755.jpg
    216.3 KB · Views: 65
  • 20210429_150845.jpg
    20210429_150845.jpg
    356.3 KB · Views: 60
  • 20210429_152422.jpg
    20210429_152422.jpg
    282.1 KB · Views: 60
  • 20210429_154406.jpg
    20210429_154406.jpg
    272 KB · Views: 53
  • 20210429_154413.jpg
    20210429_154413.jpg
    302.8 KB · Views: 54
  • 20210429_154818.jpg
    20210429_154818.jpg
    490.9 KB · Views: 66

BobbyLane

Imperial Masterpiece
Messages
6,058
Reaction score
17,659
Location
London, England
Thinking ahead, crude virtual of clump/multi trunk, i couldnt figure out how to blank out the background in windows paint. just bored playing around, this is what i see in the material and why i chose it.
20210429_150845.jpg
 

Woocash

Omono
Messages
1,607
Reaction score
2,262
Location
Oxford, UK
I started on the clump layer today, then i began a second layer, probably another clump further up the tree.
i think 2 layers on this tree will be enough for now.
on the second i actually used large ryuga knob cutters, i found them to be quicker and more effective at rippling the cambium and lifting it up, then i cleaned up with the knife.
I am intrigued to see if this works well on beech. I’ve often seen beech with great potential way up from the base so I really hope it works for you. Both projects seem like they’ll be great long term as well. Did you use any hormone or anything?
 

BobbyLane

Imperial Masterpiece
Messages
6,058
Reaction score
17,659
Location
London, England
I am intrigued to see if this works well on beech. I’ve often seen beech with great potential way up from the base so I really hope it works for you. Both projects seem like they’ll be great long term as well. Did you use any hormone or anything?
Thats true, i often see tall beeches n hornbeams with amazing potential higher up at the nurserys but always opt for smaller stuff until now.
they do work tho, check this out, recently posted on FB before n after page, layered Beech,
Screenshot_20210501-195452_Facebook.jpg
its hit and miss for many though. its important to use good fresh S moss according to one chap who has success with beech n hornbeam layers. so ive done that, i also used homone, this one because ive rooted trident cuttings with it before. i sprinkled some in the bucket with water the moss was in. pasted a little on the top cambium as well. time will tell😁
IMG-20210501-WA0012.jpeg
 

Woocash

Omono
Messages
1,607
Reaction score
2,262
Location
Oxford, UK
Thats true, i often see tall beeches n hornbeams with amazing potential higher up at the nurserys but always opt for smaller stuff until now.
they do work tho, check this out, recently posted on FB before n after page, layered Beech,
View attachment 371874
its hit and miss for many though. its important to use good fresh S moss according to one chap who has success with beech n hornbeam layers. so ive done that, i also used homone, this one because ive rooted trident cuttings with it before. i sprinkled some in the bucket with water the moss was in. pasted a little on the top cambium as well. time will tell😁
View attachment 371876
Wowee that’s a definite positive transformation!

I reckon you’ve set them up well anyway. I tried a hornbeam layer last year which bridged the gap quite easily despite cleaning it up like you have so a girdle is a good idea as well. Good luck!
 

BobbyLane

Imperial Masterpiece
Messages
6,058
Reaction score
17,659
Location
London, England
the layer at the top is showing signs of root, but i might leave it till spring to sever it. i severed a green beech layer a few weeks ago that had way more roots and was taken at a similar time
 

Attachments

  • Screenshot_20210903-144758_Chrome.jpg
    Screenshot_20210903-144758_Chrome.jpg
    371.3 KB · Views: 61
  • 20210903_143756.jpg
    20210903_143756.jpg
    276.8 KB · Views: 62
  • 20210903_143740.jpg
    20210903_143740.jpg
    368 KB · Views: 84

NaoTK

Chumono
Messages
670
Reaction score
3,600
Location
Western Oregon
Has anyone had any issues allowing the layer to freeze solid over winter? I also plan to leave some layers over winter
 

BobbyLane

Imperial Masterpiece
Messages
6,058
Reaction score
17,659
Location
London, England
Has anyone had any issues allowing the layer to freeze solid over winter? I also plan to leave some layers over winter
i can remember seeing some threads where there was no concern about leaving layers on over winter, as many dont remove until the following spring. i could still be tempted to sever it over autumn though will see.
 

Paradox

Imperial Masterpiece
Messages
9,338
Reaction score
11,405
Location
Long Island, NY
USDA Zone
7a
I've been wondering how well beech air layer. I've got a European beech I want to ground layer
 

F0E

Seedling
Messages
6
Reaction score
10
Location
Virginia
USDA Zone
7
Hello, rookie here. I am curious to know what the benefit of waiting until spring would be? To give it a better chance of growing once cut or to allow more time for roots to form?
 

BobbyLane

Imperial Masterpiece
Messages
6,058
Reaction score
17,659
Location
London, England
I've been wondering how well beech air layer. I've got a European beech I want to ground layer
It's only my second layer attempt. ive severed one already this season, a green beech that put out lots of roots.
 

BobbyLane

Imperial Masterpiece
Messages
6,058
Reaction score
17,659
Location
London, England
Hello, rookie here. I am curious to know what the benefit of waiting until spring would be? To give it a better chance of growing once cut or to allow more time for roots to form?
yeh i'd like to see more roots, but there could be quite a bit more root deep inside, but when i looked two weeks ago these copper beeches had no signs of any roots hence me thinking about leaving them until spring, in fact i opened up two of these and there wasnt a single root, so this one looks like the only one thats been a success out of the copper beeches.

Mach5 had layered beech, who also left this one on until spring

there will be many examples around the forum of layers being left until spring to maximise success. im new to layering.
 
  • Like
Reactions: F0E

Vali

Mame
Messages
245
Reaction score
292
Location
Romania
USDA Zone
6
Has anyone had any issues allowing the layer to freeze solid over winter? I also plan to leave some layers over winter
I left a layer on last winter without protection. In the spring, the roots seemed to be dead. They were white and flattened. It could have been because of the excess moisture and the freezing. In the spring, I messed around with the sphagnum moss to see if there was anything alive or looking better inside, but didn't have any luck. Probably ripped off some small ones. The good part of the story is that the tree woke up this spring, grew normally and, at this time, it has a few roots formed, but not yet enough. It is a euonymus europaeus and the temperatures were very low last winter. I'm quite sure there were even -20 C in some nights.
 

leatherback

The Treedeemer
Messages
13,934
Reaction score
26,864
Location
Northern Germany
USDA Zone
7
I would just separate. We are still 6 weeks out till first frost, under early winter conditions. The trees will continue pushing roots for a bit longer. (In fact, I put a layer on a maple today, to see whether a late-summer layer would root fast, considering the push into dormancy includes pushing roots).
 

BobbyLane

Imperial Masterpiece
Messages
6,058
Reaction score
17,659
Location
London, England
Decided to go ahead n sever. hopefully theres enough here to sustain the tree im confident it will be ok. this time i didnt tease much moss out like i did on the green beech on another thread, that one is lagging a bit. so this one ive treated a bit differently. ive also opted for a deeper pot...
 

Attachments

  • 20210907_140202.jpg
    20210907_140202.jpg
    418.1 KB · Views: 59
  • 20210907_142354.jpg
    20210907_142354.jpg
    241.4 KB · Views: 57
  • 20210907_142409.jpg
    20210907_142409.jpg
    233.3 KB · Views: 52
  • 20210907_152001.jpg
    20210907_152001.jpg
    281.4 KB · Views: 45
  • 20210907_152012.jpg
    20210907_152012.jpg
    306 KB · Views: 42

BobbyLane

Imperial Masterpiece
Messages
6,058
Reaction score
17,659
Location
London, England
You can see why this section was worth layering. theres maybe a twin trunk tree here, with those two middle trunks, some nice lines and movement in here..

i managed to get it quite firm in the pot, will leave in shade for a couple weeks now.
20210907_155802.jpg20210907_155909.jpg20210907_155922.jpg
 

Attachments

  • 20210907_155956.jpg
    20210907_155956.jpg
    263.1 KB · Views: 30
  • 20210907_155841.jpg
    20210907_155841.jpg
    248.7 KB · Views: 26
  • 20210907_160031.jpg
    20210907_160031.jpg
    279 KB · Views: 35
Top Bottom